Glossary: O

Type d'objectif de microscope qui présente un champ plat dans environ 65% du centre de l'image, contre 80% pour un objectif semi-plan et 95% pour un objectif plan. Ils corrigent l’aberration chromatique dans les longueurs d’onde rouges et bleues et l’aberration sphérique dans la longueur d’onde verte.

The angle at which an off-axis mirror directs and focuses incident collimated light.

Describes the amount of energy that can pass through an optical material. It is directly related to the transmittance of the material, which is the ability of light to propagate through a given medium. A large OD means more blocking.

A type of optic comprised of a core surrounded by a relatively thin cladding layer of lower index material. This geometry causes internal reflection of light inside the fiber and defines the maximum angles accepted by the fiber. An optical fiber emits into a cone of equal angle, not as a beam of light. Coherent fiber bundles can relay images from one end to the other; whereas, incoherent bundles are used for propagation of light alone.

A precisely polished flat surface, used as a reference against which the flatness of an unknown surface may be compared.

A useful tool that allows optical designers to determine various values without having to completely ray trace a system. It is obtained by comparing two rays within a system at any axial point. It is constant for any two rays at every point in the system. In other words, if the invariant for a set of two rays is known, ray trace one of the rays and then scale that by the invariant to find the second.

For a perfect optical system, the optical path, or distance, from an object point to a corresponding image point will be equal for all rays. In near-perfect systems, slight differences will exist between rays resulting in an optical path difference, usually expressed in fractions of the wavelength being analyzed.

A system in which a supplied signal causes the deflection of the electron beam in a cathode-ray tube, thus forming a visible trace on the phosphor screen of the tube, allowing for examination of signal characteristics.

The power measured at the exit of a laser cavity, commonly expressed as minimum output or maximum output. The class designation of a laser is based in part upon this characteristic.

Également appelé « nombre f « (ou « f/# ») et « nombre d’ouverture ». En optique, il s'agit du rapport entre la distance focale et le diamètre, tandis qu'en imagerie, il s'agit du rapport entre la distance focale et la pupille de sortie du système. Un f/# bas (objectif rapide) a une capacité de collecte de lumière élevée tandis qu'un f/# élevé (objectif lent) a une capacité de collecte de lumière faible.

La partie non obstruée d'un composant optique ou mécanique qui présente une zone limitée à travers laquelle la lumière peut passer. L’ouverture utile prend en compte les anneaux de montage, etc. sur les optiques qui réduisent la surface utilisable.