

La conception flexible du Système Laser Coherent® OBIS™ Galaxy permet aux utilisateurs d’associer jusqu’à huit lasers OBIS™ de longueur d’onde prédéterminée dans une fibre. L’élément est livré préchargé avec trois lasers (405 nm, 488 nm et 640 nm) et a la capacité de s’agrandir pour intégrer jusqu’à cinq lasers supplémentaires de 445 nm, 514 nm, 532 nm, 561 nm et 590 nm. Le système laser Galaxy OBIS™ Coherent® fournit une sortie par fibre des lasers combinés, par une fibre de maintien de polarisation à mode unique de 2 m de long avec un connecteur FC/APC. La haute efficacité de couplage maximise le débit, tout en maintenant la polarisation pour assurer une excellente performance et qualité d’image.
Le mélange de rayons laser est simple grâce à la conception révolutionnaire de couplage à fibres. Le système comprend :
Remarque : Les lasers OBIS™ utilisés dans ce système ont été conçus spécifiquement pour le Système Laser Galaxy. Les lasers OBIS™ standards ne sont pas compatibles. Un laser 590 nm supplémentaire fait partie de la série Coherent Sapphire.
Coherent® OBIS™ Galaxy Laser System | System Specifications |
Number of Input Fiber Connections | 8 |
Input Channels | Channel 1: 405nm (included) Channel 2: 445nm Channel 3: 488nm (included) Channel 4: 514nm Channel 5: 532nm Channel 6: 561nm Channel 7: 590nm Channel 8: 640nm (included) |
Power Throughput (%) (when used with Coherent Galaxy Compatible Lasers) | 405 - 590nm: >45, Typical >60 640nm: >55, Typical >70 |
Maximum Power Per Channel (mW) | 100 |
Maximum Total Output Power (mW) | <500 |
RMS Noise (%) | <0.5 (20 Hz to 2 MHz) |
Peak-to-Peak Noise | <2% (20 Hz to 20 kHz) |
Fiber Connector Type (Input Connectors) | FC form-factor, ultra-flat contact FC/UFC with extended-life interface, anti-reflection (AR) coated tip |
Polarization Extinction Ratio Loss | <50% |
Long-term Power Throughput (8 hours, ±3°C) | >95% |
Long-term Power Throughput (Average) | ≤2% / 1000 hours |
Output Fiber | |
Fiber Connector Type (distal end) | FC/APC, 8° angled, with extended-life interface |
Fiber Cable Type | 3mm monocoil |
Fiber Cable Length | 2m minimum |
Fiber Numerical Aperture (NA) | 0.055 (1/e2) |
Fiber Core Diameter | 3.8μm (typical) |
Spatial Mode | TEM00 |
M2 (Beam Quality) | ≤1.1 |
Fiber Minimum Bend Radius | 51mm (2.0") |
Fiber Tensile Load | 1kg (2.2 lbs) maximum |
Fiber Connector Type (to OBIS Galaxy) | FC form-factor, ultra-flat contact FC/UFC with extended-life interface |
Utility and Environmental Requirements | |
Dimensions | 229 x 170 x 29mm (9.0" x 6.7" x 1.1") |
Weight | 1.4kg (3 lbs) |
Shock Tolerance (11ms) | 30g |
Vibration (g-RMS) | 7.7 (20 Hz to 2 kHz) |
Ambient Temperature | Operating Temperature: 10 - 50°C Storage Temperature: -20 - 60°C |
Galaxy Laser System: Pre-Loaded Lasers Specifications | |||
Description | OBIS 405nm | OBIS 448nm | OBIS 640nm |
Wavelength (nm) | 405 | 488 | 640 |
Output Power (mW) | 50 | 30 | 75 |
Mode Quality, M2 | ≤1.1 | ≤1.1 | ≤1.1 |
Fiber Cable Type | 3mm monocoil, 3.5μm core | 3mm monocoil, 3.5μm core | 3mm monocoil, 3.5μm core |
Output from Fiber | FC/UFC with extended-life interface, Anti-Reflection (AR) coated tip | FC/UFC with extended-life interface, Anti-Reflection (AR) coated tip | FC/UFC with extended-life interface, Anti-Reflection (AR) coated tip |
Numerical Aperture NA (1/e2) | 0.045 | 0.045 | 0.045 |
Digital Modulation (MHz) | 150 | 150 | 150 |
Modulation Frequency (kHz) | 500 | 500 | 500 |
Laser Class - CDRH | IIIb | IIIb | IIIb |
Spatial Mode | TEM00 | TEM00 | TEM00 |
Power Stability (%) | <2 | <2 | <2 |
Warm-Up Time (minutes) | <5 | <5 | <5 |
Polarization | 100:1 Min | 100:1 Min | 100:1 Min |
Operating Temperature (°C) | 10 to 40 | 10 to 40 | 10 to 40 |
Output Type | Fiber-Coupled | Fiber-Coupled | Fiber-Coupled |